It is usually not the pouch causing the leak, it is usually the filter. Either the filter was not completely wetted at first point of use, or too much pressure has been applied to pouch during filtration process. Be sure to slowly squeeze the water through the filter, giving the filter fibers time to fully saturate. The initial flow rate may seem slow, but will increase as fibers become wetted.
Back Flushing Process
Back flush your filter (better and more often) using your syringe. You cannot hurt the filter fibers, so please be FORCEFUL in your back flush process. When using the syringe, do not be gentle, it will only form paths of least resistance instead of blowing out the particulates that may be trapped in your filter.
Do not overtighten the filter on the pouch. Overtightening can cause the o-rings to embed into the threads or lodge into the opening of the pouch. If an o-ring is out of place you may not a have a tight seal and water could leak out the bottom of the filter. Please watch our video on Important Squeeze Filter Tips to better understand how to care for your squeeze bags. Until you learn the perfect balance of force and cleaning, we recommend bringing a backup pouch with you on your trip.
Before the pouches leave our factory, they are 100% air-tested. While they are rugged, these pouches are not indestructible. They tear as a result of too much pressure being applied. This happens when water is forced through the filter too fast or when your filter needs cleaning, which creates more resistance. Do not squeeze the pouch hard or wring the pouch.